User Manual

English

SMH5

3. INSTALLING THE SMH5 ON YOUR HELMET

1. Loosen the two screws on the back plate of the clamp using the

enclosed Allen Wrench. Insert the back plate of the clamp unit

between the internal padding and external shell of the helmet, and

tighten the two screws.

Insert

- Full-face Helmet Kit

• Wired Microphone

• Hook and Loop Fastener for Wired Microphone

• USB Power & Data Cable

• Glued Surface Mounting Plate

• Hook and Loop Fasteners for Speakers

• Speaker Pads

• Allen Wrench