www.sena.
SPH10 © 1998-2015 Sena Technologies, Inc. All rights reserved. Sena Technologies, Inc. reserves the right to make any changes and improvements to its product without providing prior notice. Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. PRISM™, 20S™, 3S™, SMH10™, SMH10R™, SMH5™, SMH5-FM™, SPH10™, SPH10H™, EXPAND™, SPH10H-FM™, SPH10S™, SR10™, SR10i™, SM10™, Bluetooth Pack for GoPro® are trademarks of Sena Technologies, Inc. or its subsidiaries.
SPH10 1. INTRODUCTION..................................................................5 2. PACKAGE CONTENTS.......................................................6 3. WEARING THE SPH10........................................................7 3.1 Microphone Installation...............................................................7 3.2 Placing the Headset on Your Ear................................................8 4. POWERING ON/OFF AND CHARGING..............................8 4.1 Powering On......
SPH10 16. UNIVERSAL INTERCOM...................................................32 16.1 Universal Intercom Pairing........................................................32 16.2 Two-way Universal Intercom.....................................................32 16.3 Three-way Universal Intercom...................................................33 16.4 Four-way Universal Intercom.....................................................34 17. MUSIC SHARING........................................................
SPH10 Thank you for choosing the Sena SPH10, Bluetooth Stereo Headset and Intercom for outdoor sports and activities. With the SPH10, you can call handsfree on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations by Bluetooth wirelessly, and have intercom conversations in full duplex with other SPH10 users. The SPH10 is compliant with the Bluetooth 3.
SPH10 2.
SPH10 • Mini Microphone • USB Power & Data Cable • Stereo Audio Cable • Boom Microphone Sponges 3. WEARING THE SPH10 English • Boom Microphone 3.1 Microphone Installation Two microphones are included in the package: a long-boom microphone for high noise environment and a short microphone for indoor use. Plug the microphone into the microphone port to fit triangle marks as described in the below picture.
SPH10 Since SPH10 is mostly exposed on external environment where noise prevails, microphone can be selected according to the noise level. For the highly noisy environment, boom-microphone is recommended allowing microphone to stay near user’s mouth. For the less-noisy environment, mini microphone is recommended allowing users to move freely. 3.2 Placing the Headset on Your Ear The speaker with microphone should be placed on the left ear. Then you can place earhooks over ears as shown: 4.
SPH10 4.4 Low Battery Warning 4.5 Checking the Battery Level You can check the battery level in two different ways when the headset is powering on. 4.5.1 LED Indicator When the headset is powering on, the red LED flashes rapidly indicating the battery level. 4 flashes = High, 70~100% 3 flashes = Medium, 30~70% 2 flashes = Low, 0~30% 5.
SPH10 6. PAIRING THE SPH10 WITH BLUETOOTH DEVICES Before using the SPH10 Bluetooth headset with any of Bluetooth devices for the first time, you need to do the pairing operation. It can be paired with Bluetooth mobile phones, Bluetooth stereo devices such as MP3, or motorcycle specific Bluetooth GPS, and with other Sena Bluetooth headsets. This pairing operation is only required once for each Bluetooth device.
SPH10 6.3 Bluetooth Stereo Device Pairing 1. If the Bluetooth stereo device is integrated with the mobile phone such as smartphones, you don’t need to pair the SPH10 with it separately. When the SPH10 is paired with the mobile phone, it is also paired as a stereo music device. 2. If you have a stand alone Bluetooth stereo device, follow the paring procedure separately. The procedure is the same as the procedure in “6.1 Mobile Phone Pairing”. Note: 1.
SPH10 systems use mobile phone profile for turn-by-turn voice instruction. You can simultaneously use a mobile phone and a GPS which uses mobile phone profile by one of the following procedures. 6.4.1 Multipoint GPS Pairing If you use GPS only for turn-by-turn voice instructions, not for Bluetooth stereo music streaming, multipoint pairing is recommended for the GPS connection. Multipoint Bluetooth pairing allows the SPH10 to connect two HFP devices at the same time: mobile phone and GPS navigation.
SPH10 English 6.4.2 GPS Pairing as Mobile Phone If GPS is not only used for turn-by-turn voice instructions but also is your preferred Bluetooth stereo music source, you can pair the GPS to the SPH10 by following the simple procedures in “6.1 Mobile Phone Pairing”. When you do this, the SPH10 thinks the GPS is a mobile phone so you can no longer pair your mobile phone to the SPH10 directly.
SPH10 6.5 Pairing with the Sena SR10, Bluetooth Two-way Radio Adapter The Sena SR10 is a Bluetooth two-way radio adapter for group communication, and uses HFP as do most motorcycle specific GPS navigation systems. If you pair the SPH10 with a SR10 by multipoint pairing, the SPH10 is able to have two HFP devices at the same time: mobile phone and Sena SR10. 1. Turn on the headset and press the Jog Dial for 5 seconds until the red LED is rapidly flashing and you hear multiple beeps. 2.
SPH10 Smart Phone HFP + A2DP Wired Connection HFP SPH10 If you have a MP3 stereo music phone such as a smartphone, sometimes you may need to selectively use the SPH10 for A2DP stereo music only or for mobile phone handsfree only. This instruction is for advanced users who want to pair the SPH10 to their smartphones only with one selective profile: A2DP stereo for music or HFP for phone call. Two-way radio Mobile Phone Pairing Multipoint Sena SR10 Pairing Wired Connection English 7.
SPH10 2. Within 2 seconds, tap the Jog Dial again, then the LED turns to red flashing and the beeps turn to double mid-tone beeps. You will hear a voice prompt saying “Media selective pairing”. 3. Search for Bluetooth devices on your smartphone. Select the Sena SPH10 in the list of devices detected on your phone. 4. Enter 0000 for the PIN. Some smartphones may not ask for PIN. 7.2 HFP for Phone Call Only 1.
SPH10 B D C Note: Pairing A & B 4. You can make other pairings between the headset A and C, and between the headset A and D by following the same procedure as above. A B A D C B D For example, after the pairing procedures listed above, headset D is the first intercom friend of headset A. Headset C is the second intercom friend of headset A, and headset B is the third intercom friend of headset A. 8.
SPH10 9. SPH10 CONFIGURATION SETTING You can set the configuration of the SPH10 by the voice menu instruction as below. 1. To enter into voice configuration menu, press and hold the Jog Dial for 12 seconds until the LED shows solid blue and you hear high tone double beeps. You will also hear a voice prompt saying “Configuration menu”. 2. Rotate the Jog Dial clockwise or counter-clockwise to navigate between the menus. You will hear voice prompts for each menu items as below. 3.
SPH10 Note: 1. A fter assigning a phone number to one of three speed dials, you can continually assign another phone number to the rest of two speed dials. 2. Y ou can assign phone numbers to speed dials in your PC. Please visit the Sena Bluetooth web site at www. sena.com for more information. 9.2 Enabling/Disabling Voice Activated Phone Answering Voice Prompt “VOX phone” Factory Default Enable Enable Tap the Phone Button Disable Tap the Jog Dial English 2.
SPH10 friend by speaking any word loudly enough.The most effortless way to trigger intercom VOX is to blow into the microphone as if blowing dust off the microphone. If you start an intercom conversation by VOX, the intercom terminates automatically when you and your intercom friend remain silent for 20 seconds. However, if you manually start an intercom conversation by tapping the Jog Dial, you have to terminate the intercom conversation manually.
SPH10 Voice Prompt "Noise control" Factory Default Enable Enable Tap the Phone Button Disable Tap the Jog Dial When Advanced Noise Control is enabled, the background noise is reduced during an intercom conversation. When it is disabled, the background noise is mixed with your voice during intercom. Note: If you use your SPH10 with the Bluetooth Audio Pack for GoPro or Prism, you can enable or disable this feature only during Normal Audio Recording Mode.
SPH10 Rotate Jog Dial Tap Phone Button Tap Jog Dial Speed Dial Execute N/A VOX Phone Enable Disable VOX Intercom Enable Disable Voice Prompt Enable Disable Sidetone Enable Disable Advanced Noise Control Enable Disable Delete All Pairings Execute N/A Exit Configuration Execute N/A Voice Configuration Menu & Button Operations 22 10.
SPH10 You can listen to stereo music in two ways: with the enclosed stereo audio cable or by Bluetooth wireless stereo. Profile (AVRCP), so if your Bluetooth audio device also supports the AVRCP, you can use the SPH10 to remotely control music playback. You not only can adjust the volume but also use the functions such as play, pause, next track and previous track. 1. To adjust the volume, rotate the Jog Dial. 11.
SPH10 3. To track forward or track back, rotate while pressing the Jog Dial clockwise or counter clockwise. 12. MOBILE PHONE CALL MAKING AND ANSWERING 12.1 Mobile Phone Call Making and Answering Note: Bluetooth music is available only when the MP3 jack port remains open. Please make sure the audio cable is unplugged from the clamp unit to play music by Bluetooth. 24 1. When you have an incoming call, simply tap the Phone Button or the Jog Dial to answer the call. 2.
SPH10 Note: 1. I f you are using multipoint mobile phone connection and you have an incoming call from the second phone during the call of the first phone, then you may still receive the call from second phone. In this case, the call from the first phone is on waiting mode. If you end a call, then it will automatically guide you to the first phone call. 2. I f you are using multipoint connection of mobile phone and GPS, you may not be able to listen to the GPS voice instruction during the phone call. 12.
SPH10 6. If you want to exit the speed dial immediately, rotate the Jog Dial until you hear a voice prompt saying “Cancel”, and tap the Phone Button or the Jog Dial. If any button is not pressed within 15 seconds, the SPH10 will exit the voice speed dial menu and goes back to stand-by mode. Note: Make sure that you connect the mobile phone and the headset in order to use the speed dial function.
SPH10 Terminate End Two-way Intercom Conversation Start intercom End intercom 1st intercom friend 2nd intercom friend 3rd intercom friend Single tap Double tap Triple tap Single tap 13.2 Intercom and Mobile Phone Call 1. When you have an incoming mobile phone call during an intercom conversation, you will hear a ring tone. You can choose whether to 1) answer the mobile phone call and stop the intercom conversation, or 2) reject the phone call and stay on the intercom conversation. a.
SPH10 GPS Voice Instruction Smart Phone Multipoint Pairing Two-way radio HFP + Mobile Phone Pairing A2DP HFP Mobile Phone Pairing Smart Phone Intercom SPH10 Intercom Pairing Audio from Two-way Radio Intercom Friend Intercom and GPS voice instruction 13.4 Intercom and Two-way Radio As described in 6.4 of this user's guide, you can use a two-way radio and SPH10 Bluetooth intercom simultaneously by using the Sena SR10, a Bluetooth Two-way Radio Adapter, along with the SPH10.
SPH10 1. You (A) need to be paired with two other friends (B & C) for three-way conference intercom. First Friend (B) g You (A) can have a three-way conference intercom with two other SPH10 friends (B & C) by establishing two intercom connections at the same time.
SPH10 3. The second intercom friend (C) may join the intercom by making an intercom call to you (A). (A) First Friend (B) Second Friend (C) 4. Now you (A) and two SPH10 intercom friends (B & C) are having a three-way conference intercom. (A) First Friend (B) Second Friend (C) 14.
SPH10 15.1 Start Four-way Intercom You can have four-way conference intercom with three other SPH10 users by adding one more intercom participant to the three-way intercom. While you are having three-way intercom as above in section 14.1, a new participant (D), who is an intercom friend of your intercom friend (C), may join the conference intercom by making an intercom call to your intercom friend (C). Please note that in this case, the new participant (D) is an intercom friend of (C), not of you (A).
SPH10 16. UNIVERSAL INTERCOM You can have an intercom conversation with nonSena Bluetooth headsets using the Universal Intercom function. Non-Sena Bluetooth headsets can be connected to the Sena Bluetooth headset if they support the Bluetooth Hands-Free Profile (HFP). The working distance may differ depending on the performance of Bluetooth headset that it is connected to. In general, it is shorter than normal intercom distance since it uses the Bluetooth Hands-Free Profile. 16.
SPH10 16.3 Three-way Universal Intercom (B) (A) rin g g (A) (B) (B) (C) 3. The Other SPH10 (C) may join the intercom by making an intercom call to you (A). i Pa Pa iri n (A) (C) (C) 33 English You may make a three-way Universal Intercom connection with two SPH10s and one non-Sena Bluetooth headset. If the intercom connection is made, all headsets connected cannot use the mobile phone call function since the connection between the headset and the phone is disconnected temporarily.
SPH10 4. Now you (A), non-Sena Bluetooth headset (B), and the other SPH10 (C) are having a three-way conference intercom. (A) (B) (C) 5. You may disconnect the three-way Universal Intercom using the same way as you do in normal three-way intercom. Please refer to section, 14.2 “End Three-way Intercom”. 16.
SPH10 (A) 4. Now two SPH10 headsets (A & C) and two non-Sena Bluetooth headsets (B & D) are connected with the four-way Universal Intercom. (C) (A) (D) (B) 3. The non-Sena Bluetooth headset (D) may join the conference intercom by making an intercom call to the SPH10 (C). (A) (B) (C) (D) (B) You may disconnect a four-way Universal Intercom using the same way as you do in a normal four-way intercom. Please refer to section, 15.2 “End Four-way Intercom”. 16.4.
SPH10 17. MUSIC SHARING You can start sharing music with an intercom friend using Bluetooth stereo music during a two-way intercom conversation. When you terminate music sharing, you can go back to the intercom conversation. To start or terminate sharing music, press and hold the Jog Dial for 1 second during an intercom conversation until you hear a double beep and you and your intercom friend will listen to or terminate sharing music.
SPH10 End intercom first End phone call first Tap Jog Dial while having a mobile phone call Tap Jog Dial Press Jog Dial for 2” or Tap Phone Button or Wait for the called person to end the call 19. INTERCOM FAILURE English Start When you try to start an intercom conversation with an intercom friend who is already having a conference intercom with other riders or a mobile phone call, you will hear a low tone double beep signifying an intercom busy signal. In this case, you have to try again later.
SPH10 20. INTERCOM RECONNECTION If your intercom friend goes out of range while having an intercom conversation, you may hear static noise and eventually the intercom will be disconnected. In this case, the SPH10 automatically tries to reconnect the intercom every 8 seconds and you will hear high tone double beeps until the intercom is reestablished. If you don’t want to make a reconnection, tap the Jog Dial to stop the attempt. 38 21. RESET TO FACTORY DEFAULT SETTINGS 1.
SPH10 When the SPH10 is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset button at the back of the headset main unit. Insert a paper clip into the reset pin-hole and press the reset button for a second with light pressure. The SPH10 will be switched off, and you have to turn the system back on and try again. However, this will not restore the headset to factory default settings. 23. FIRMWARE UPGRADE English 22.
SPH10 24.
SPH10 Case 2 Bluetooth GPS* Mobile Phone Pairing Intercom Pairing Mobile Phone English Bluetooth Pairing Procedure 1 GPS - Mobile Phone Pairing 2 Mobile Phone Pairing 3 Intercom Pairing GPS - Mobile Phone Pairing Bluetooth GPS* zumo 550/660/665, TomTom Rider Usage • GPS zumo 660/665: GPS instruction, phone call, listening to music zumo 550, TomTom Rider: GPS instruction, phone call • Intercom 41
SPH10 Case 3 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Multipoint Pairing 3 Intercom Pairing Bluetooth GPS* zumo 220/350/550/660/665, TomTom Rider Bluetooth GPS* Mobile Phone Pairing Intercom Pairing 42 Multipoint Pairing Usage • Mobile Phone: phone call • GPS zumo 660/665: GPS instruction, listening to music zumo 220/350/550, TomTom Rider: GPS instruction • Intercom Mobile Phone
SPH10 Case 4 Mobile Phone Bluetooth GPS* Yupiteru, smartphone apps Mobile Phone Pairing Intercom Pairing Mobile Phone Pairing English Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pairing 3 Intercom Pairing Usage • Mobile Phone: phone call • GPS: GPS instruction • Intercom Bluetooth GPS* 43
SPH10 Case 5 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Multipoint Pairing 3 Intercom Pairing Mobile Phone GPS Mobile Phone Pairing SR10 Multipoint Pairing Intercom Pairing Two-way Radio 44 Usage • Mobile Phone: phone call • SR10: two-way radio, GPS guidancel • Intercom
SPH10 Case 6 MP3 Player Mobile Phone Pairing Mobile Phone GPS Mobile Phone Mobile Phone Pairing Pairing Bluetooth GPS* English Bluetooth Pairing Procedure 1 GPS - Mobile Phone Pairing 2 Mobile Phone Pairing 3 Mobile Phone Pairing 4 Intercom Pairing Bluetooth GPS* zumo 220/350/550/660/665, TomTom Rider Usage • GPS: phone call, GPS instruction • MP3 Player: listening to music • Intercom Intercom Pairing 45
SPH10 Case 7 Mobile Phone Mobile Phone Pairing GPS Multipoint Pairing Mobile Phone Pairing Intercom Pairing Mobile Phone Pairing Two-way Radio 46 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pairing 3 Mobile Phone Pairing 4 Multipoint Pairing 5 Intercom Pairing Usage • Mobile Phone: phone call • SR10: two-way radio, GPS instruction • SM10: listening to music/sharing • Intercom
SPH10 Button Phone Button + Jog Dial Phone Button Description Power-on Power-off Duration 1 sec Tapping LED Solid blue Solid red Beep English 25.
SPH10 CERTIFICATION AND SAFETY APPROVALS FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules.
SPH10 WEEE (Waste Electrical and Electronic Equipment ) The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available.
SPH10 SAFETY INFORMATION Please ensure that the product is properly used by observing the warnings and cautions below to prevent any risk and/or damage to property. Product Storage and Management • Keep the product free of dust. It may damage mechanical and electronic parts of the product. • Do not store the product in high temperatures as this may reduce the life span of electronic devices, damage the battery, and/or melt plastic parts of the product. • Do not store the product in cold temperatures.
SPH10 Battery This product has an irreplaceable rechargeable battery inside. Therefore, when using the product, make sure to adhere to the following: • Never separate the battery from the product as this may damage the product. • The battery performance may be reduced over time with usage. • In recharging the battery, make sure to use an approved charger provided by the manufacturer.
SPH10 PRODUCT WARRANTY AND DISCLAIMER Limited Warranty Limited Warranty Sena Technologies, Inc. (“Sena”) guarantees the product quality based on the technical specification stated in the product manual, and data regarding product warranty. Here, product warranty extends to the product only. Sena will not be liable for any loss, damage of human life, or loss of property which may result from using the product beyond defective parts or flaws that occur due to problems in manufacture.
SPH10 • Risk factors, which may occur when you use the product, may be due to errors of the manufacturer, its agents, or third parties which are involved in the manufacturing. • Risk factors, which may occur when you use the product, may be unforeseeable. Therefore, you must take full responsibility for any damage or loss caused by all risk factors which may occur when using the product. • When you use the product, use good judgment; never use it under the influence of alcohol. 6.
SPH10 Further, Sena will not be liable for any substantial damage not related to the, condition, environment, or malfunction of the product. All risks related with the operation of the product depend entirely on the user regardless of its use by the initial purchaser of a third party. AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. IN ANY CASE, THE TOTAL COMPENSATION LIABILITIES OF SENA OR ITS SALES AGENTS SHALL NOT EXCEED THE PRICE PAID FOR THE PRODUCT BY THE PURCHASER.
SPH10 Warranty Service To obtain product warranty service, send the defective product, at your expense, to the manufacturer or the seller along with proof of purchase (a receipt that shows the purchase date, a product registration certificate of the Website, and other relevant information). Take necessary measures to protect the product. In order to get a refund or replacement, you must include the whole package as it was purchased.
2.3.0 www.sena.com User's Guide for Firmware v5.