www.sena.
SPH10 © 1998-2014 Sena Technologies, Inc. All rights reserved. Sena Technologies, Inc. reserves the right to make any changes and improvements to its product without providing prior notice. Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH10R™, SMH5™, SMH5-FM™, SPH10™, SPH10H™, EXPAND™, SPH10H-FM™, SPH10S™, SR10™, SM10™ are trademarks of Sena Technologies, Inc. or its subsidiaries.
SPH10 1. INTRODUCTION..................................................................5 2. PACKAGE CONTENTS.......................................................6 3. WEARING THE SPH10........................................................7 3.1 Microphone Installation...............................................................7 3.2 Placing the Headset on Your Ear................................................8 4. POWERING ON/OFF AND CHARGING..............................8 English CONTENTS 9.
SPH10 16. UNIVERSAL INTERCOM...................................................31 16.1 Universal Intercom Pairing........................................................31 16.2 Two-way Universal Intercom.....................................................32 16.3 Three-way Universal Intercom...................................................32 16.4 Four-way Universal Intercom.....................................................34 17. THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT............
SPH10 Thank you for choosing the Sena SPH10, Bluetooth Stereo Headset and Intercom for outdoor sports and activities. With the SPH10, you can call handsfree on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations by Bluetooth wirelessly, and have intercom conversations in full duplex with other SPH10 users. The SPH10 is compliant with the Bluetooth 3.
SPH10 2.
SPH10 • Mini Microphone • USB Power & Data Cable • Stereo Audio Cable • Boom Microphone Sponges 3. WEARING THE SPH10 English • Boom Microphone 3.1 Microphone Installation Two microphones are included in the package: a long-boom microphone for high noise environment and a short microphone for indoor use. Plug the microphone into the microphone port to fit triangle marks as described in the below picture.
SPH10 Since SPH10 is mostly exposed on external environment where noise prevails, microphone can be selected according to the noise level. For the highly noisy environment, boom-microphone is recommended allowing microphone to stay near user’s mouth. For the less-noisy environment, mini microphone is recommended allowing users to move freely. 3.2 Placing the Headset on Your Ear The speaker with microphone should be placed on the left ear. Then you can place earhooks over ears as shown: 4.
SPH10 4.4 Low Battery Warning 4.5 Checking the Battery Level You can check the battery level in two different ways when the headset is powering on. 4.5.1 LED Indicator When the headset is powering on, the red LED flashes rapidly indicating the battery level. 4 flashes = High, 70~100% 3 flashes = Medium, 30~70% 2 flashes = Low, 0~30% 5.
SPH10 6. PAIRING THE SPH10 WITH BLUETOOTH DEVICES Before using the SPH10 Bluetooth headset with any of Bluetooth devices for the first time, you need to do the pairing operation. It can be paired with Bluetooth mobile phones, Bluetooth stereo devices such as MP3, or motorcycle specific Bluetooth GPS, and with other Sena Bluetooth headsets. This pairing operation is only required once for each Bluetooth device.
SPH10 6.3 Bluetooth Stereo Device Pairing 1. If the Bluetooth stereo device is integrated with the mobile phone such as smartphones, you don’t need to pair the SPH10 with it separately. When the SPH10 is paired with the mobile phone, it is also paired as a stereo music device. 2. If you have a stand alone Bluetooth stereo device, follow the paring procedure separately. The procedure is the same as the procedure in “6.1 Mobile Phone Pairing”. Note: 1.
SPH10 systems use mobile phone profile for turn-by-turn voice instruction. You can simultaneously use a mobile phone and a GPS which uses mobile phone profile by one of the following procedures. 6.4.1 Multipoint GPS Pairing If you use GPS only for turn-by-turn voice instructions, not for Bluetooth stereo music streaming, multipoint pairing is recommended for the GPS connection. Multipoint Bluetooth pairing allows the SPH10 to connect two HFP devices at the same time: mobile phone and GPS navigation.
SPH10 English 6.4.2 GPS Pairing as Mobile Phone If GPS is not only used for turn-by-turn voice instructions but also is your preferred Bluetooth stereo music source, you can pair the GPS to the SPH10 by following the simple procedures in “6.1 Mobile Phone Pairing”. When you do this, the SPH10 thinks the GPS is a mobile phone so you can no longer pair your mobile phone to the SPH10 directly.
SPH10 6.5 Pairing with the Sena SR10, Bluetooth Two-way Radio Adapter The Sena SR10 is a Bluetooth two-way radio adapter for group communication, and uses HFP as do most motorcycle specific GPS navigation systems. If you pair the SPH10 with a SR10 by multipoint pairing, the SPH10 is able to have two HFP devices at the same time: mobile phone and Sena SR10. 1. Turn on the headset and press the Jog Dial for 5 seconds until the red LED is rapidly flashing and you hear multiple beeps. 2.
SPH10 Smart Phone HFP + A2DP Wired Connection HFP SPH10 If you have a MP3 stereo music phone such as a smartphone, sometimes you may need to selectively use the SPH10 for A2DP stereo music only or for mobile phone handsfree only. This instruction is for advanced users who want to pair the SPH10 to their smartphones only with one selective profile: A2DP stereo for music or HFP for phone call. Two-way radio Mobile Phone Pairing Multipoint Sena SR10 Pairing Wired Connection English 7.
SPH10 2. Within 2 seconds, tap the Jog Dial again, then the LED turns to red flashing and the beeps turn to double mid-tone beeps. You will hear a voice prompt saying “Media selective pairing”. 3. Search for Bluetooth devices on your smartphone. Select the Sena SPH10 in the list of devices detected on your phone. 4. Enter 0000 for the PIN. Some smartphones may not ask for PIN. 7.2 HFP for Phone Call Only 1.
SPH10 B D C Note: Pairing A & B 4. You can make other pairings between the headset A and C, and between the headset A and D by following the same procedure as above. A B A D C B D For example, after the pairing procedures listed above, headset D is the first intercom friend of headset A. Headset C is the second intercom friend of headset A, and headset B is the third intercom friend of headset A. 8.
SPH10 9. SPH10 CONFIGURATION SETTING You can set the configuration of the SPH10 by the voice menu instruction as below. 1. To enter into voice configuration menu, press and hold the Jog Dial for 12 seconds until the LED shows solid blue and you hear high tone double beeps. You will also hear a voice prompt saying “Configuration menu”. 2. Rotate the Jog Dial clockwise or counter-clockwise to navigate between the menus. You will hear voice prompts for each menu items as below. 3.
SPH10 Note: 1. A fter assigning a phone number to one of three speed dials, you can continually assign another phone number to the rest of two speed dials. 2. Y ou can assign phone numbers to speed dials in your PC. Please visit the Sena Bluetooth web site at www. sena.com for more information. 9.2 Enabling/Disabling Voice Activated Phone Answering Voice Prompt “VOX phone” Factory Default Enable Enable Tap the Phone Button Disable Tap the Jog Dial English 2.
SPH10 friend by speaking any word loudly enough.The most effortless way to trigger intercom VOX is to blow into the microphone as if blowing dust off the microphone. If you start an intercom conversation by VOX, the intercom terminates automatically when you and your intercom friend remain silent for 20 seconds. However, if you manually start an intercom conversation by tapping the Jog Dial, you have to terminate the intercom conversation manually.
SPH10 9.
SPH10 10. FUNCTION PRIORITY The SPH10 operates in the following order of priority: (highest) (lowest) Mobile phone, Intercom, Stereo music by audio cable Music sharing by Bluetooth stereo music, Bluetooth stereo music A lower priority function is always interrupted by a higher priority function. For example, stereo music is interrupted by intercom call, and intercom conversation is interrupted by incoming mobile phone call. 11.
SPH10 3. To track forward or track back, rotate while pressing the Jog Dial clockwise or counter clockwise. Note: 2. To play or pause music, press and hold the Jog Dial for 1 second until you hear a double beep. Bluetooth music is available only when the MP3 jack port remains open. Please make sure the audio cable is unplugged from the clamp unit to play music by Bluetooth.
SPH10 12. MOBILE PHONE CALL MAKING AND ANSWERING 12.1 Mobile Phone Call Making and Answering 1. When you have an incoming call, simply tap the Phone Button or the Jog Dial to answer the call. 2. You can also answer the incoming call by loudly speaking any word of your choice if Voice Activated Phone Answering is enabled. 3. To end a call, tap the Phone Button or press the Jog Dial for 2 seconds until you hear a beep, or wait for the called person to end the call. 4.
SPH10 12.2 Speed Dialing (1) Last number redial (4) Speed dial 3 (2) Speed dial 1 (5) Cancel (3) Speed dial 2 4. After selecting the last number redial menu, you will hear a voice prompt saying “Last number redial”. Then, to redial the last phone call number, tap the Phone Button or the Jog Dial. 5. To call one of the speed dials, rotate the Jog Dial clockwise or counter-clockwise to navigate between the menus until you hear a voice prompt saying “Speed dial (#)”.
SPH10 tapping. A double or triple tapping will do nothing in this case. 13. TWO-WAY INTERCOM 13.1 Start and End Two-way Intercom 1. You can start an intercom conversation with one of any intercom friends by tapping the Jog Dial: single tapping to intercom with the first intercom friend, double tapping with the second intercom friend, and triple tapping with the third intercom friend.
SPH10 13.3 Intercom and GPS If you pair a Bluetooth GPS to the SPH10 as described in 6.3 of this user's guide, you can hear the turn-by-turn voice instruction of the GPS while having an intercom conversation. The GPS voice instruction interrupts intercom conversation, but it is automatically reestablished after the GPS voice instruction ends. English b. To reject the phone call and stay on the intercom conversation, press the Jog Dial for 2 seconds until you hear a beep.
SPH10 14. THREE-WAY CONFERENCE INTERCOM Smart Phone HFP + Mobile Phone Pairing A2DP Wired Connection Audio from Two-way Radio SPH10 Intercom 14.1 Start Three-way Intercom Two-way radio Multipoint Pairing Intercom Pairing Wired Connection Sena SR10 Wired Connection Radar Detector Intercom Friend Intercom and Two-way Radio 28 GPS You (A) can have a three-way conference intercom with two other SPH10 friends (B & C) by establishing two intercom connections at the same time.
SPH10 i Pa g First Friend (B) Second Friend (C) 2. Start an intercom conversation with one of the two friends in your intercom group. For example, you (A) may start an intercom conversation with the intercom friend (B). Or intercom friend (B) may start an intercom call with you (A). First Friend (B) Second Friend (C) 4. Now you (A) and two SPH10 intercom friends (B & C) are having a three-way conference intercom. (A) First Friend (B) (A) First Friend (B) (A) g (A) rin rin i Pa 3.
SPH10 14.2 End Three-way Intercom When you are a member of an active three-way conference intercom, you can completely terminate the conference intercom or just disconnect an intercom connection with one of your active intercom friends. 1. Press the Jog Dial for 1 second until you hear a beep to terminate three-way conference intercom completely. It terminates both intercom connections with (B) and (C). 2.
SPH10 15.2 End Four-way Intercom Jog Dial Operation Press for 1” Result Disconnect (B), (C) & (D) Single tap Disconnect (B) Double tap Disconnect (C) & (D) End Four-way Intercom 16. UNIVERSAL INTERCOM English As same in the case of three-way intercom, you can completely get out of the four-way conference intercom or just disconnect a single intercom connection. 1. Press the Jog Dial for 1 second until you hear a beep to terminate four-way conference intercom.
SPH10 32 g (B) (A) n iri Pa Non-Sena Bluetooth headsets may initiate the Universal Intercom connection, activating the voice dialing or using the redialing operation. You may also disconnect the existing connection by ending a call operation function (refer to the users’ manual of the headsets for voice dialing, redialing, and ending a call).
SPH10 (A) (B) 4. Now you (A), non-Sena Bluetooth headset (B), and the other SPH10 (C) are having a three-way conference intercom. (A) (B) (C) 3. The Other SPH10 (C) may join the intercom by making an intercom call to you (A). (C) 5. You may disconnect the three-way Universal Intercom using the same way as you do in normal three-way intercom. Please refer to section, 14.2 “End Threeway Intercom”. (A) (B) (C) 33 English 2.
SPH10 16.4 Four-way Universal Intercom You may make a four-way Universal Intercom connection with a couple of different configurations, 1) three SPH10s and one non-Sena Bluetooth headset or 2) two SPH10s and two non-Sena Bluetooth headsets.
SPH10 (A) (C) (D) (B) You may disconnect a four-way Universal Intercom using the same way as you do in a normal four-way intercom. Please refer to section, 15.2 “End Four-way Intercom”. 16.4.2 Four-way Universal Intercom Case 2 Three SPH10 headsets (A, C and D) and one non-Sena Bluetooth headset (B). The procedure is the same as the case 1 described in section 16.4.1. (A) (B) 17. THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT English 4.
SPH10 Start End intercom first End phone call first Tap Jog Dial while having a mobile phone call Tap Jog Dial Press Jog Dial for 2” or Tap Phone Button or Wait for the called person to end the call Start & End Three-way Conference Phone Call 36 18. INTERCOM FAILURE When you try to start an intercom conversation with an intercom friend who is already having a conference intercom with other riders or a mobile phone call, you will hear a low tone double beep signifying an intercom busy signal.
SPH10 If your intercom friend goes out of range while having an intercom conversation, you may hear static noise and eventually the intercom will be disconnected. In this case, the SPH10 automatically tries to reconnect the intercom every 8 seconds and you will hear high tone double beeps until the intercom is reestablished. If you don’t want to make a reconnection, tap the Jog Dial to stop the attempt. 20. RESET TO FACTORY DEFAULT SETTINGS English 19. INTERCOM RECONNECTION 1.
SPH10 21. FAULT RESET When the SPH10 is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset button at the back of the headset main unit. Insert a paper clip into the reset pin-hole and press the reset button for a second with light pressure. The SPH10 will be switched off, and you have to turn the system back on and try again. However, this will not restore the headset to factory default settings. 38 22.
SPH10 Case 1 English 23.
SPH10 Case 2 Bluetooth Pairing Procedure 1 GPS - Mobile Phone Pairing 2 Mobile Phone Pairing 3 Intercom Pairing GPS - Mobile Phone Pairing Bluetooth GPS* Mobile Phone Pairing Intercom Pairing 40 Mobile Phone Bluetooth GPS* zumo 550/660/665, TomTom Rider Usage • GPS zumo 660/665: GPS instruction, phone call, listening to music zumo 550, TomTom Rider: GPS instruction, phone call • Intercom
SPH10 Case 3 Bluetooth GPS* zumo 220/350/550/660/665, TomTom Rider Bluetooth GPS* Mobile Phone Pairing Intercom Pairing Multipoint Pairing English Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Multipoint Pairing 3 Intercom Pairing Usage • Mobile Phone: phone call • GPS zumo 660/665: GPS instruction, listening to music zumo 220/350/550, TomTom Rider: GPS instruction • Intercom Mobile Phone 41
SPH10 Case 4 Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pairing 3 Intercom Pairing Mobile Phone Bluetooth GPS* Yupiteru, smartphone apps Mobile Phone Pairing Intercom Pairing 42 Mobile Phone Pairing Usage • Mobile Phone: phone call • GPS: GPS instruction • Intercom Bluetooth GPS*
SPH10 Case 5 Mobile Phone GPS Mobile Phone Pairing English Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Multipoint Pairing 3 Intercom Pairing Usage • Mobile Phone: phone call • SR10: two-way radio, GPS guidancel • Intercom SR10 Multipoint Pairing Intercom Pairing Two-way Radio 43
SPH10 Case 6 Bluetooth Pairing Procedure 1 GPS - Mobile Phone Pairing 2 Mobile Phone Pairing 3 Mobile Phone Pairing 4 Intercom Pairing MP3 Player Mobile Phone Pairing Mobile Phone 44 GPS Mobile Phone Mobile Phone Pairing Pairing Bluetooth GPS* Intercom Pairing Bluetooth GPS* zumo 220/350/550/660/665, TomTom Rider Usage • GPS: phone call, GPS instruction • MP3 Player: listening to music • Intercom
SPH10 Case 7 Mobile Phone Pairing GPS Multipoint Pairing Mobile Phone Pairing English Mobile Phone Bluetooth Pairing Procedure 1 Mobile Phone Pairing 2 Mobile Phone Pairing 3 Mobile Phone Pairing 4 Multipoint Pairing 5 Intercom Pairing Usage • Mobile Phone: phone call • SR10: two-way radio, GPS instruction • SM10: listening to music/sharing • Intercom Intercom Pairing Mobile Phone Pairing Two-way Radio 45
SPH10 24.
SPH10 FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules.
SPH10 1999/5/EC. For further information, please consult www. sena.com. Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland. Industry Canada Statement This device complies with Industry Canada licenseexempt RSS standard(s).
SPH10 Please ensure that the product is properly used by observing the warnings and cautions below to prevent any risk and/or damage to property. Product Storage and Management • Keep the product free of dust. It may damage mechanical and electronic parts of the product. • Do not store the product in high temperatures as this may reduce the life span of electronic devices, damage the battery, and/or melt plastic parts of the product. • Do not store the product in cold temperatures.
SPH10 • Do not use the product near hazardous explosives. When there are near any explosion hazards, turn off the power and heed any regulations, instructions, and signs in the area. • When using the product, drive at a low speed (slower than 35km/h) for safety. In addition, be certain to conform to laws regarding the use of communications devices while driving. • Do not put the product where it may hamper the driver's vision or manipulate it while driving. This may cause traffic accidents.
SPH10 Limited Warranty Limited Warranty Sena Technologies, Inc. (“Sena”) guarantees the product quality based on the technical specification stated in the product manual, and data regarding product warranty. Here, product warranty extends to the product only. Sena will not be liable for any loss, damage of human life, or loss of property which may result from using the product beyond defective parts or flaws that occur due to problems in manufacture.
SPH10 3. You are responsible for ensuring that your medical condition permits usage of the product and that you are in sufficient physical condition for using any device which can be used with it. In addition, you must ensure that the product does not limit your abilities and that you are able to use it safely. 4. You must be an adult who can take responsibilities for using the product. 5.
SPH10 AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. IN ANY CASE, THE TOTAL COMPENSATION LIABILITIES OF SENA OR ITS SALES AGENTS SHALL NOT EXCEED THE PRICE PAID FOR THE PRODUCT BY THE PURCHASER. Use of this product may violate local or national laws. In addition, be aware once again that correct and safe use of the product is entirely your responsibility.
SPH10 • In the event the surface of the product is damaged by use. Warranty Service To obtain product warranty service, send the defective product, at your expense, to the manufacturer or the seller along with proof of purchase (a receipt that shows the purchase date, a product registration certificate of the Website, and other relevant information). Take necessary measures to protect the product. In order to get a refund or replacement, you must include the whole package as it was purchased.
SPH10 2.2.1 English www.sena.com User's Guide for Firmware v5.