User`s guide
English
SPH10H-FM
17
You can set the configuration of the SPH10H-FM by the
voice menu instruction as below.
1. To enter into voice configuration menu, press and
hold the Jog Dial for 12 seconds until the LED shows
solid blue and you hear high tone double beeps. You
will also hear a voice prompt saying “Conguration
menu”.
2. Rotate the Jog Dial clockwise or counter-clockwise
to navigate between the menus. You will hear voice
prompts for each menu items as below.
3. You can enable the feature or execute the command
by tapping the Phone Button, or disable the feature
by tapping the Jog Dial.
4. If any button is not pressed within 10 seconds, the
SPH10H-FM will exit the configuration and goes back
to stand-by.
5. If you want to exit the configuration immediately,
rotate the Jog Dial until you hear a voice prompt,
“Exit conguration”, and tap the Phone Button.
9. SPH10H-FM CONFIGURATION SETTING
Voice Prompt
“VOX phone”
Factory Default Enable
Enable Tap the Phone Button
Disable Tap the Jog Dial
The voice prompt for each menu item is as below:
(1) VOX phone (4) RDS AF setting
(2) VOX intercom (5) Delete all pairings
(3) Voice prompt (6) Exit conguration
9.1 Enabling/Disabling Voice Activated Phone
Answering
If this feature is enabled, you can answer incoming calls
by simply saying a word loudly enough. For example,
when you hear a series of beeps for an incoming call,
VOX phone
RDS AF setting
Exit configuration VOX intercom
Delete all pairings Voice prompt