User`s guide

SPH10S

2. Search for Bluetooth devices on your mobile phone.

Select the Sena SPH10S in the list of the devices

detected on the mobile phone.

3. Enter 0000 for the PIN. Some mobile phone may not

ask for the PIN.

4.Themobilephoneconrmsthatpairinghascompleted

and the SPH10S is ready to use. You will hear a voice

prompt from the SPH10S saying “Your headset is

paired”.

5. If the pairing process is not completed within three

minutes, the SPH10S will return to stand-by mode.

6.2 Multipoint Pairing

Typical Bluetooth headsets can connect with only one

HFP(Hands-FreeProle)device,butmultipointpairing

allows the headset to connect with two HFP devices

at the same time. So, when you already have a mobile

phone connected with the SPH10S, you can also pair

and connect a second mobile phone or other HFP

devices such as GPS or Sena SR10, Bluetooth adapter.

1. To pair the second mobile phone, press the Jog

Dial for 5 seconds again until the red LED is rapidly

ashingandyouhearmultiplebeeps.

2. Within 2 seconds, tap the Phone Button again, then

theLEDturnstoblueashingandthebeepsturnto

high tone double beeps. You will hear a voice prompt

saying “Multipoint pairing”.

3. Search for Bluetooth devices on your mobile phone.