User`s guide

SPH10S
12
and you hear multiple beeps.
2. Within 2 seconds, tap the Jog Dial again, then the
LED turns to red ashing and the beeps turn to
double mid-tone beeps. You will hear a voice prompt
saying “Media selective pairing”.
3. Search for Bluetooth devices on your smartphone.
Select the Sena SPH10S in the list of devices detected
on your phone.
4. Enter 0000 for the PIN. Some smartphones may not
ask for PIN.
7.2 HFP for Phone Call Only
1. Turn on the headset and press the Phone Button for 5
secondsuntiltheLEDashesredandbluealternately
and you hear multiple beeps.
2. Within 2 seconds, tap the Phone Button again, then
theLEDturnstoblueashingandthebeepsturnto
multiple mid-tone beeps. You will hear a voice prompt
saying “Phone selective pairing”.
3. Search for Bluetooth devices on your smartphone.
Select the Sena SPH10S in the list of devices detected
on your phone.
4. Enter 0000 for the PIN. Some smart phones may not
ask for PIN.
8. INTERCOM PAIRING
8.1 Pairing with Other SPH10S Headsets for
Intercom Conversation
The SPH10S can be paired with up to three other
headsets for Bluetooth intercom conversation.
1. Turn on the two SPH10S headsets (A and B) that you
would like to pair with each other.
2. Press and hold the Jog Dial of the headset A and B
for 5 seconds until red LEDs of the both units start
toash rapidly.You will hearavoicepromptsaying
“Intercom pairing”.
3. Simply tap the Jog Dial of any one of the two headsets
A or B (It doesn’t matter that you choose A or B.) and
wait until the LEDs of both headsets turn to blue and
intercom connection is automatically established. The
two SPH10S headsets A and B are paired with each
other for intercom conversation. If the pairing process
is not completed within one minute, the SPH10S will
return to stand-by mode.