User`s guide

English

SPH10S

5. VOLUME ADJUSTMENT

You can easily adjust the volume by rotating the Jog Dial.

You will hear a beep when the volume reaches maximum

or minimum level. The volume is set and maintained

independently at different levels for each audio source

even when you turn off and on the headset. For example,

once you set the volume for mobile phone handsfree, it

will not change even if you adjust the volume when you

hear Bluetooth MP3 music. So you can always maintain

the preferred optimum volume level for each audio

source.

6. PAIRING THE SPH10S WITH

BLUETOOTH DEVICES

Before using the SPH10S Bluetooth headset with any

of Bluetooth devices for the rst time, youneed todo

the pairing operation. It can be paired with Bluetooth

mobile phones, Bluetooth stereo devices such as MP3,

and with other Sena Bluetooth headsets. This pairing

operation is only required once for each Bluetooth

device. The headset will remain paired with the devices

and automatically connects to the paired devices again

when they are within range. You will hear a high tone

single beep and a voice prompt when the headset

connects to the paired device automatically: “Phone

connected” to a mobile phone, “Media connected” to

a Bluetooth stereo device.

6.1 Mobile Phone Pairing

1. Turn on the headset and press the Phone Button for 5

secondsuntiltheLEDashesredandbluealternately

and you hear multiple beeps. You will hear a voice

prompt saying “Phone pairing”.