Specifications

SPH10S

the phone by saying “Hello” or any other word loudly. The

factory default setting is disabled. You can enable or disable

this mode. If this mode is disabled, the only way to answer an

incoming call is to tap the Phone Button.

1. Press and hold the Phone Button for 8 seconds until the

red LED is rapidly flashing. When you do this, after first 5

seconds you press the button, you will see the headset enters

into the Mobile Phone Pairing sequence, but you have to keep

pressing the button for another 3 seconds until the red LED

flashes rapidly.

2. To enable, tap the Phone Button, then the LED shows solid

blue for 2 seconds and you will hear double beeps.

3. To disable, tap the Jog Dial, then the LED shows solid red

for 2 seconds and you will hear a single beep.

• Intercom Conversation

1. You can start an intercom conversation with any of Intercom

Friends by tapping the Jog Dial: single tapping to intercom

with the

First Intercom Friend

, double tapping with the

Second Intercom Friend

, and triple tapping with the

Third

Intercom Friend

2. To terminate an intercom conversation, single tap the Jog

Dial. Any intercom connection with any Intercom Friend will be

terminated by a single tapping. A double or triple tapping will

do nothing in this case.

3. When you have an incoming phone call during intercom

conversation, you can choose whether to pick up the call or

not after you hear the ring tone.

Intercom Friend 2

Intercom Friend

Terminate