Specifications

SPH10S
16
eventually the intercom will be disconnected. In this case,
the SPH10S automatically tries to reconnect the intercom
every 8 seconds and you will hear high tone double beeps
until the intercom is reestablished. If you don’t want to make a
reconnection, tap the Jog Dial to stop the attempt.
• Stereo Music
You can listen to stereo music in either way: with the enclosed
stereo audio cable or by Bluetooth wireless stereo.
1. By Stereo Audio Cable
Plug your stereo MP3 player directly to the SPH10S by using
the enclosed 3.5mm stereo audio jack cable. To adjust the
volume, rotate the Jog Dial on the headset. You may adjust the
volume on the MP3 player also.
MP3
Jack
2. By Bluetooth Wireless Stereo
The Bluetooth audio device must be paired with the SPH10S
by following the
Bluetooth Audio Device Pairing
instructions
described in the previous chapter. The SPH10S supports
the Audio/Video Remote Control Profile (AVRCP), so if your
Bluetooth audio device also supports the AVRCP, you can use
the SPH10S to remotely control music playback. So, you may
not only adjust the volume but also use the functions such as
play, pause, next track and previous track.
•
To adjust the volume, rotate the Jog Dial.
•
To play or pause music, press and hold the Jog Dial for 1
second until you hear a double beep.