Specifications

SPH10S

•

To track forward or track back, rotate while pressing the Jog

Dial clockwise or counter clockwise.

• Function Priority

The SPH10S operates in the following order of priority:

(highest)

Mobile phone,

Intercom,

Stereo music by audio cable, and

(lowest)

Bluetooth stereo music

A lower priority function is always interrupted by a higher

priority function. For example, stereo music is interrupted by

intercom call, and intercom conversation is interrupted by

incoming mobile phone call.

Tip: Stereo Music by Bluetooth or 3.5mm audio cable

Bluetooth music is available only when the MP3 jack port remains

open. Please make sure the audio cable is unplugged from the

clamp unit to play music by Bluetooth

Tip: Stereo Music by Bluetooth or 3.5mm audio cable

• Reset to Factory Default Settings

1. To restore the SPH10S to factory default settings, press and

hold the Phone Button for 12 seconds until the LED shows

solid red and you hear double beeps.

2. Then within 5 seconds, press the Jog Dial to confirm reset.

The headset will be restored to factory setting and switched

off automatically.

3. If you don’t press the Jog Dial within 5 seconds, the reset

attempt is canceled and the headset returns to stand-by

mode.