Specifications

SPH10S
6
POWERING ON/OFF AND CHARGING
To power on and off the headset, you don’t need to press and
hold any button for several seconds. Just short press the Jog
Dial and the Phone Button simultaneously, and you will get
quick on-and-off convenience.
• Powering On
Press the Jog Dial and the Phone Button at the same time for
about 1 second to power on. The blue LED turns on and you
will hear ascending beeps.
• Powering Off
Just short press the Jog Dial and the Phone Button
simultaneously, you don’t need to press and hold for a few
seconds. The red LED turns on for a while until it turns off
completely and you will hear descending beeps.
• Charging
The LED turns on red while charging, and turns to blue when
the headset is fully charged. It takes about 2.5 hours to be
completely charged.
• Low Battery Warning
When the battery is low, the blinking blue LED in stand-by
mode turns to red and you will hear mid-tone triple beeps.