User Manual

Tufftalk
20
6 MOBILE PHONE
6.1 Mobile Phone Call Making and Answering
1. When you have an incoming call, simply tap the Phone Button or
the Jog Dial to answer the call.
2. You can also answer the incoming call by loudly speaking any
word of your choice if Voice Activated Phone Answering (VOX
Phone) is enabled, unless you are connected to intercom.
3. To end a call, tap the Phone Button or press the Jog Dial for 2
seconds until you hear a mid-tone single beep, or wait for the
called person to end the call.
4. To reject a call, press the Jog Dial for 2 seconds until you hear a
beep while the phone is ringing.
5. There are several ways to make a phone call:
– Enter numbers on your mobile phone’s keypad and make a call.
Then the call is automatically transferred to the headset.
– Tap the Phone Button in stand-by mode to activate the voice
dialer of your mobile phone. For this, the voice dialing function
must be available on the mobile phone. Refer to
your mobile
phone manual for further instruction.
Note:
If you have two phones connected to your headset and you have an
incoming call from the second phone during the call of the first phone, then
you may still receive the call from the second phone. In this case, the call
from the first phone is on waiting mode. If you end a call, then it will
automatically guide you to the first phone call.
6.2 Speed Dialing
You can quickly make a phone call by using the voice speed dial
menu.
1. To enter into the voice speed dial menu, double tap the Phone
Button and you will hear a mid-toned single beep and a voice
prompt, “Speed dial”.
2. Rotate the Jog Dial clockwise or counter clockwise to navigate
between the menus. You will hear voice prompts for each menu
item.
3. Tap the Phone Button or the Jog Dial to select a voice menu
among the followings:
(1) Last number redial
(4) Speed dial 3
(2) Speed dial 1
(5) Cancel
(3) Speed dial 2