User Manual

Tufftalk
45
English
18.3 Fault Reset
When the Tufftalk is not working properly or is in faulty status for any
reason, you may reset by pushing the pin-hole reset button located
below the left ear cup. Separate the left ear cup and insert a paper clip
into the reset pin-hole and press the reset button for a second with
light pressure. The Tufftalk will be switched off. Restart the system and
try again. This will not restore the headset to factory default settings.
18.4 Factory Reset
1. To restore the Tufftalk to factory default settings, press and hold
the Phone Button for 10 seconds until the LED shows solid red
and you hear “Factory reset”.
2. Within 10 seconds, press the Jog Dial to conrm reset. The headset
will be restored to factory setting and switched off automatically.
You will hear, “Headset reset, goodbye”.
3. If you press the Phone Button or the Jog Dial for 10 seconds, the
reset attempt is cancelled and the headset returns to stand-by
mode. You will hear a voice prompt, “Cancelled”.