User Manual

12
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Troubleshooting
Troubleshooting
Problem Reason Solution Comment
There is no
sound coming
from the
speaker.
The power
cable is not
connected.
Connect the
power cable.
The speaker is
turned off.
Turn the
speaker on.
There is a
short circuit
or the audio
source is not
connected to
the speaker.
Check
whether the
audio cable
has a short
circuit or is
disconnected
from the
speaker. If
necessary,
plug the
cable into the
speaker.
If the audio
cable
connector
is oxidized,
worn out, or
corroded, we
recommend
replacing the
connector or
the cable.
The volume
control is
turned down.
Turn up
the volume
control on the
speaker or the
audio source.
There is
no sound
coming from
one of the
channels in a
multichannel
setup.
The
balance of
the audio
source is
not set
properly.
Adjust the
balance of
the audio
source.
This usually
occurs
when
configuring
two or
more
channels.