User Manual

8
1. Determine whether the line level output of your audio
source requires an XLR or an RCA connector. If your
audio source requires an XLR connector, use the included
XLR to XLR cable. If your audio source requires an RCA
connector, use the included XLR to RCA cable.
2. Use the included AC power cable to plug the speaker into
an AC power source.
3. Turn on your audio source and the speaker.
4. Use the volume controls on the speaker and your audio
source to adjust the audio level. When using an audio
source that has its own master level, such as a recording
console, turn the volume on the speaker all the way up,
and control the volume through the master level on the
console.
Fine-Tune Settings
You can fine-tune the frequency response of the speaker via
four fine-tune settings on the rear of the cabinet.
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Setting Up
Audio Source
Power Source