User Manual

▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪

Getting Started

Mounting the Receiver

To use the AWS-2000 as a shoe-

mounted wireless system mounted

on a camera, follow these steps:

Camera Mount (for Use with

One Receiver)

1. Align the camera mount with

the back of the AWS-2000R

receiver. Press it onto the

receiver until it snaps into place.

2. Loosen the locking ring by turning it counterclockwise,

and slide the mounting foot into your camera’s shoe

mount.

3. Tighten the locking ring by turning it clockwise until

it’s secure.

Dual Mount (for Use with Two Receivers)

1. Align the dual mount with

the back of both

AWS-2000R receivers.

Press the receivers onto the

mount until they snap

into place.

2. Place the camera mount

over the front of one of the receivers, and press it until it

snaps into place.

3. To mount both receivers onto your camera, loosen the

locking ring by turning it counterclockwise, and slide the

mounting foot into your camera’s shoe mount.

4. Tighten the locking ring by turning it clockwise until

it’s secure.