User Manual

Getting Started
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
The battery icon indicates the battery
level. The icon blinks to indicate a
critically low battery level.
Attaching the Antennas
Screw the antennas clockwise into the
threaded antenna sockets. Make sure
they are tightly attached.
Connecting the Receiver
The AWS-2000 microphone system includes two output
cables for devices with an XLR input or a 3.5 mm TRS input.
The output cables feature right-angled locking 3.5mm
connectors to allow for flexible positioning, whether the
receiver is mounted on a camera or used in a bag. Choose the
appropriate cable for your device, and follow these steps:
1. Plug the right-angle male 3.5
mm plug into the output jack on
the bottom of the AWS-2000R
receiver, and turn the locking sleeve
clockwise until tight.
2. Connect the other end of the cable
to your device.
Connecting the Microphone
1. Plug the microphone’s male 3.5 mm plug
into the input jack on the top of the
AWS-2000T transmitter.
2. Secure the cable by turning the locking
sleeve clockwise until tight.
11