User Manual

▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪

Setting Output Levels

AWS-2000R Receiver

Main Output

The main output controls the signal level that is sent to the

input device (camera or recorder) via the 3.5 mm jack on the

bottom of the AWS-2000R receiver.

1. Use the Up/Down buttons to adjust the output. The

Screen will read [

MAIN OUT ] along with the output level

[ -29 db ] to [ 8 dB ].

2. Press the Set button to save the change.

Set the output level so the input device receives a high

signal level without distorting.

Peak Indicator

The peak indicator lets you know if the

output signal to the recording device is

too strong and distorting.

Solid blue

The output level is normal and is

not distorting.

Occasional red ﬂashes

The output signal is peaking and

possibly causing distortion. Adjust the levels of the

transmitter and receiver down to avoid these signal peaks.

Toggling the Output Control

The AWS-2000R receiver features a toggle function that

lets you quickly switch the Up/Down buttons’ control of the

main or headphone output.

1. Double-press the power button. [

OUTPUT PHONE ] will

appear on the screen.