User Manual

▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Advanced Functions
AWS-2000T Transmitter and AWS-2000P Plug-On
Transmitter
Pilot Tone
For a description of pilot tone, see page 25.
Important! In order for pilot tone to protect against
interference, the pilot tone option must be activated on the
transmitter AND the receiver.
To activate pilot tone, follow these steps:
1. Press and hold the Set button to enter menu mode.
2. Scroll to [
ADVANCED MENU ], and press the Set button.
3. In the advanced menu, scroll to [
PILOT ], and press the Set
button. The menu selection will blink.
4. Use the Up/Down buttons to select [
ON ]. Press the Set
button to save the setting and activate the pilot tone.
When the pilot tone is active, [ PLT ] is displayed on the
screen, and the transmitter’s battery meter illuminates on
the receiver.
To turn off the pilot tone, select [
OFF ] in the
[ PILOT ] menu.
Low Cut Filter
The low-cut filter minimizes low-frequency noise that can
come from fans, air conditioners, or ambient room noise. The
filter rolls off at 100 Hz to prevent unwanted rumble from
compromising your audio.
To activate the low-cut filter, follow these steps:
1. Press and hold the Set button to enter menu mode.
2. Scroll to [
ADVANCED MENU ], and press the Set button.
3. In the advanced menu, scroll to [
LO CUT ], and press the
Set button. The menu selection will blink.
28