USER’S GUIDE Table of Contents: Introduction................................ 2 Overview..................................... 3 Precautions.................................4 Replacing the Battery in CL6 the Power Supply.....................5 Specifications ���������������������������6 CL6 Connector and Kit Option..........................................7 Warranty......................................
Thank you for choosing Senal. The Senal CL6 is a broadcast-quality, omnidirectional lavalier microphone ideal for TV, film, and stage applications. The CL6 is designed with a twisted pair cable that is packed with nylon yarn and. protected with a high-density spiral shield. This cable design, combined with a durable and compact capsule housing, delivers ultra-low handling noise. With a head diameter of only 4 mm, the CL6 is easy to conceal in wardrobes or props for onscreen and onstage use.
Overview Lavalier microphone Single tie-clip Double tie-clip Cable clip Magnetic clip with lanyard Viper clip Two (2) windscreens PS-48B Power Supply available separately and in select kits Overview ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ 3
Precautions ▪ Please read and follow these instructions and keep this manual in a safe place. ▪ Keep this product away from water and all flammable gases or liquids. ▪ Do not attempt to disassemble or repair this product. ▪ Handle this product with care. ▪ Clean this product with only a soft, dry cloth. ▪ Make sure that this product is intact and that there are no missing parts. ▪ All photos are for illustrative purposes only.
Replacing the Battery in the Power Supply The Senal PS-48B Power Supply runs on an LR44 battery. To replace the battery, follow these instructions: OPEN 1. Open the battery compartment cover from the notch at the base of the. microphone. 2. Rotate and open the battery compartment as shown by the arrow on the. power supply. 3. Remove the old battery if necessary and insert a fresh battery in the orientation indicated on the battery compartment. 4.
Specifications 6 ▪ ▪ Transducer: Back Electret Condenser Polar pattern: Omnidirectional Frequency response: 20 Hz to 20 kHz Sensitivity: -53 dB ±3 dB (0 dB = 1 V/μbar @ 1 kHz) Impedance: 2,000 Ω ±30% @ 1 kHz Signal-to-noise ratio: 24 dB(A) Maximum input sound level: 120 dB Operating voltage: 1 to 10 V DC Housing material: Brass Weight: 0.4 oz. (11.3 g) Head dimensions: 0.33″ × 0.16″ (8.37 × 4 mm) Cable diameter: 0.05″ (1.
CL6 Connector and Kit Options The CL6 is available with the following connector and kit options: ▪ CL6-3.5H Lavalier Microphone with 3.5 mm Connector for Sennheiser Evolution series ▪ CL6-3.5N Lavalier Microphone with 3.5 mm Connector for Sony UWP series ▪ CL6-TA4 Lavalier Microphone with TA4 Connector for Shure transmitters ▪ CL6-TA5 Lavalier Microphone with TA5 Connector for Lectrosonics transmitters ▪ CL6-HRS Lavalier Microphone with 4-pin Hirose Connector for Audio-Technica transmitters ▪ CL6-3.
One-Year Limited Warranty Senal provides a limited warranty to the original purchaser that this product is free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. Senal’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at Senal’s discretion, of any product that fails during normal consumer use.