User Manual

ManualsBrandsSenal ManualsAudio Monitoring150W 6.5" Premium 2-Way Ceiling Speaker System

Table of Contents:

Introduction. ............................................. 1

Overview ...................................................2

Precautions ...............................................2

Setting Up ................................................ 3

Preparing the ceiling ............................ 3

Drop Ceilings .................................... 3

Fixed Ceilings ................................... 3

Connecting the wiring to the

removable locking connector............3

Wiring Schemes ..................................... 4

Attaching and securing the

wiring to the speaker............................4

Installing the speaker into

the ceiling..................................................5

Adjust the Multi-Tap Selector.............5

Attaching the Grille .............................. 5

Painting ..................................................... 5

Preparing.............................................5

Painting the rim................................5

Painting the grille.............................5

Speciﬁcations ......................................... 6

Frequency Response ........................... 6

Troubleshooting ......................................7

Three-Year Limited Warranty.............7

CSP-SERIES

Thank you for choosing Senal.

The CSP-series speakers are passive coaxial two-way speakers that provide premium sound

quality for use with 70V or 100V systems and for low-ohm systems.

These high power - low distortion speakers feature wide coverage that evenly distributes high

ﬁdelity audio to ﬁll large and small spaces. All models are ideal for broadcasting announcements

and music reproduction in commercial and residential applications.

The CSP-series ceiling speakers have a multi-tap transformer, which allows ﬂexibility in

conﬁguring multiple speakers of a high-impedance system. It is easily accessed with the multi-

tap selector on the front bafﬂe of the speaker. Low frequencies are enhanced with a vented

port, and precise and smooth high frequencies are delivered by the coaxially mounted 3/4"

titanium-coated tweeter. The sealed backcan enhances overall ﬁdelity by focusing the sound

and preventing the distribution of sound into the surrounding ceiling structure.

Removable locking connectors simplify the process of wiring the speakers. Each speaker comes

with the mounting brackets and hardware necessary for installation. The attachment screw

system makes installation simple while providing a secure mounting connection to most ceiling

types. Secondary support tabs ensure extra security for compliance with building codes. The

speakers can be painted to match ceiling décor.

CSP-162

The CSP-162 is a powerful 150-watt, low-distortion ceiling speaker with a built-in multi-tap

transformer with maximum power of 60W. It features a 6.5-inch woofer and 3/4" titanium-

coated tweeter.

CSP-142

The CSP 142 is a compact 80-watt ceiling speaker with a built-in multi-tap transformer with

a maximum power of 30W. It features a 4-inch woofer and 3/4" titanium-coated tweeter.

Low clearance of 6.25" (15.9 cm) makes it possible to install this speaker into smaller ceiling

spaces.

USER’S GUIDE

Summary of content (8 pages)

PAGE 1
USER’S GUIDE CSP-SERIES Thank you for choosing Senal. Table of Contents: The CSP-series speakers are passive coaxial two-way speakers that provide premium sound quality for use with 70V or 100V systems and for low-ohm systems. Introduction............................................... 1 These high power - low distortion speakers feature wide coverage that evenly distributes high fidelity audio to fill large and small spaces.
PAGE 2
Overview CSP-162 CSP-142 4. 1. 1. 6. 2. 5. 2. 3. 6. 3. 5. Front baffle 2. Woofer 3. Tweeter 4. Multi-tap selector 5. Attachment screws 6. Vented port 7. Removable locking connector 8. Secondary support tab 9. Mounting tabs 10. Connecter cover plate (CSP-162) 11. 4. Cover plate door (CSP-162) 12. Adjustable strain-relief fitting (CSP-162) 15. 8. 8. 13. Removable cover (CSP-142) 14. Knockout (CSP-142) 10. 7. 1. 15. (2) Screws (CSP-142) 7. 12. 16.
PAGE 3
Setting Up 8. Fit the slots of the C-ring over the rails and attach it by inserting the bolts through the tabs of the C-ring and securely tightening the nuts. The CSP-series speakers are designed for easy installation. If necessary, installation can be accomplished without access above the ceiling. ▪ Drywall saw 9. Pull the speaker wire out so that it extends beyond the ceiling and gives you enough length to complete the installation.
PAGE 4
LOOP IN IN LOOP THRU THRU 7.5 15 The removable locking connector has four terminals. The pin 30 function of each terminal is listed on the label located on the 0V speaker. 0 1 30 16 R R 1 2 3 4 3. Make sure all screw-down terminals are securely tightened. 15 7.5 3.
PAGE 5
Installing the speaker into the ceiling Attaching the Grille Before installing the speaker into the ceiling, it is recommended to attach a safety line to the secondary support tab. Consult local codes for more information about secondary support requirements. 1. Place the grille over the speaker baffle. 2. Press the edge of the grille into place until it is level with the rim. Note: Pressing on the center can dent 1.
PAGE 6
Specifications CSP-142 CSP-162 Height: 6.25" (15.9 cm) 7.5" (20 cm) Width: 7" (17.8 cm) 8.7" (22 cm) Width w/ rim: 8.5" (21.6 cm) 9.7" (24.6 cm) Weight: 4.95 lb. (2.25 kg) 7.85 lb. (3.56 kg) Frequency Response: 80 Hz to 20 kHz 75 Hz to 20 kHz Power capacity: 80 Watts 150 Watts Max SPL: 85dB SPL, 1W @ 1m 90dB SPL, 1W @ 1m Transformer Tap: 70V: 30W, 15W, 7.5W, 3.7W 100V: 30W, 15W, 7.5W 16 Ohms transformer bypass 70V: 60W, 30W, 15W, 7.
PAGE 7
Troubleshooting Problem Possible Causes No Sound Solution Amplifier Make sure the amplifier is getting an input signal. Make sure the volume knob is turned up. Make sure the amp channel output is connected to the correct channel input. Make sure the amplifier is not faulty. Connect the cable to another amplifier. If there is output, the problem was the amplifier. If not, the problem may be the cable. Wiring Make sure the cables are securely connected.
PAGE 8
www.senalsound.