User Manual

6
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Instructions
Powering the CXGN Microphone
The CXGN microphones operate on phantom power. Once connected to the power
source, the CXGN mic is ready to work.
Important! When integrating the CXGN microphone into a video or audio conferencing
system, or using it with a mixing board, make sure that phantom power is enabled.
Using the Windscreen
The CXGN microphone should always be used with the included foam windscreen. It
prevents the vocal pops that occur with the letters P and B, and it protects the mic
capsule from corrosive moisture.
To install the windscreen, slip it over the microphone capsule.
Microphone Placement
The optimum placement for the microphone is 6 to 12 inches from the source.
Ideally, the microphone should be pointed directly toward the source to capture the best
sound.
Always point the microphones away from speakers and other sources of unwanted noise.