User Manual

▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪

Installing the Battery (MC24-EL only)

The MC24-EL can also run on a single AA battery. To install the battery, follow these steps:

1. Unscrew the base of the microphone and slide it down to expose the battery compartment.

Note: The battery compartment cover does not come off. Do not try to force it off of the

microphone.

2. Insert the bottom of the battery into the battery compartment according to the orientation on

the diagram.

3. Press the top of the battery down into place in the compartment.

4. Slide the battery cover over the battery compartment and screw it in until tight.

Note: The microphone draws power from the battery when it is installed. To prolong battery life,

remove the battery when the microphone is not in use.