USER’S GUIDE Table of Contents: Introduction..............................2 Precautions...............................3 Overview.................................. 4 Instructions..........................5-7 Specifications.....................8-9 MXBM-621 Troubleshooting....................10 Charts........................................11 Warranty..................................
Thank you for choosing Senal. Senal’s MX-series Professional Boundary Microphones are sleek, low-profile microphones that are designed with optimized frequency response and sensitivity for capturing voices. Both omnidirectional and cardioid models are perfect for video conferences, lectures, . and meetings. The MX-series microphones integrate into most AV conferencing systems or sound systems.
Precautions • Please read and follow these instructions, and keep this manual in a safe place. • Keep this product away from water and any flammable gases or liquids. • Do not attempt to disassemble or repair this product. • Handle this product with care. • Clean this product with only a soft, dry cloth. • Make sure that this product is intact and that there are no missing parts. • All images are for illustrative purposes only.
Overview Sound pickup panel Indicator LED On = Mic on Off = Mute 4 ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ MUTE LED -FLAT -LO CUT MXBM-621/C High-pass filter switch Up = Flat Down = Low Cut Mute button ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ Overview
Setting Up To set up your room with omnidirectional or cardioid MX microphones, refer to the illustrations below. Cardioid Polar Pattern LED CXBM-620 MUTE The MXBM-621/C rejects off-axis noise. Use it in rooms with inadequate acoustic treatment or in spaces where background noise is problematic. The MXBM-621/C will capture the voice of the person sitting directly in front of it while it minimizes room noise and reverberation.
Using the MX Boundary Microphone Each application of the MX Boundary Microphone will be slightly different. The following scenarios cover frequently used setups. Live Lecture/Sound Reinforcement Mixing console LED MUTE Power amplifier Ideal in an auditorium or house of worship where a voice needs to be amplified for an audience. MXBM-621/C Note: MX-series microphones need phantom power in order to operate.
Powering the MX Microphone The MX-series microphones operate on phantom power. Once connected to the power source, the MX Boundary Mic is ready to work. Important! When integrating the MX Moundary Mic into a video or audio conferencing system, or using it with a mixing board, make sure that phantom power is enabled. High-Pass Filter Activate the high-pass filter when using the microphone in rooms with inadequate acoustic treatment or constant noise from air conditioning, fans, or lights.
Specifications 8 ▪ ▪ ▪ MXBM-621/C MXBM-621/O Transducer Condenser Condenser Polar pattern Cardioid Omnidirectional Frequency response 30 Hz–20 kHz 60 Hz–16 kHz Maximum input level 120 dB (THD ≤1.5% @ 1 kHz) 120 dB (THD ≤1.
MXBM-621/C MXBM-621/O Weight 7.4 oz. (210 g) 7.4 oz. (210 g) Cable length 25 ft. (7.6 m) 25 ft. (7.
Troubleshooting Problem Solution The microphone is connected, but there’s no sound. ▪ 10 ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ • Make sure that both XLR connectors on the cable are fully inserted into the plugs on the microphone and input device (conferencing system or . mixing board). • Make sure you are connected to an XLR port with phantom power, and that the phantom power is turned on. • If the indicator LED is off, touch the mute button to unmute .
Relative Response in dB Frequency Response Graph - Cardiod Cardiod Polar Pattern -20 0° 330° -30 60° 300° -40 90° 270° -50 120° 240° -60 50 20 100 200 1K 500 2K 5K 20K 10K 210° Frequency Response Graph - Omni 150° 180° Frequency in Hertz Relative Response in dB 30° Omni Polar Pattern -20 0° 330° -30 30° 60° 300° -40 90° 270° -50 120° 240° -60 50 20 100 200 1K 500 2K 5K 20K 10K 210° 180° Frequency in Hertz Charts ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Two-Year Limited Warranty This Senal product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of two (2) years from the original purchase date or thirty (30) days after replacement, whichever occurs later.