User Manual

7
The Attenuation Pad / The High-Pass Filter
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪▪
2� Adjust the position of the pop filter to suit your vocalist� The
optimal distance between the filter and the microphone capsule
is approximately 1�5" (3�8 cm)�
The Attenuation Pad
The attenuation pad lowers the SC-550X’s output by 10 dB and is useful for preventing distortion when
recording loud sounds like cymbals and electric guitar cabinets�
To engage the attenuation pad, slide the pad switch so it rests next to the -10 dB mark� To disengage
the attenuation pad, slide the pad switch so it rests next to the 0 dB mark�
The High-Pass Filter
The high-pass filter helps prevent the SC-550X from picking up low-frequency noises that can interfere
with your recording, like the rumble from an air conditioner�
To activate the high-pass filter, slide the high-pass filter switch so it rests next to the mark� To
deactivate the high-pass filter, slide the switch so it rests next to the mark�