User Manual
2
Thank you for choosing Senal.
The Senal XU-1648 XLR-to-USB Interface enables you to
plug your dynamic or condenser XLR microphone into
your computer’s USB port. The 16-bit/48-kHz sampling
rate delivers studio-quality sound, and the interface
provides switchable phantom power for condenser
microphones. The headphone output allows latency-
free monitoring, with a headphone level for volume
control and a monitor level to adjust the balance
between playback audio and the microphone.
Precautions
▪ Please read and follow these instructions
and keep this manual in a safe place.
▪ Exposure to high sound levels can cause
permanent hearing loss. Avoid listening at high
volumes for extended periods of time.
▪ Keep this product away from water and
all flammable gases or liquids.
▪ Do not attempt to disassemble or repair this product.
▪ Clean this product with only a soft, dry cloth.
▪ Make sure that this product is intact and
that there are no missing parts.
▪ All photos are for illustrative purposes only.
▪ Please read and follow these instructions
and keep this manual in a safe place.
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Introduction / Precautions