User Manual

4
Getting Started
1. Plug the XU-1648 into your computer via the included
USB cable. The USB power indicator will glow blue.
2. Plug your microphone into the XU-1648’s XLR
connector. If you are using a condenser microphone,
press the phantom power button to power your
microphone. The phantom power indicator will glow red.
Setting the XU-1648 as Your
Computer’s Default Sound Device
Your computer will automatically detect the XU-1648, but it
may not set it as the default sound device. If you are using a
Windows operating system, open up Sounds and Audio
Devices from the Control Panel. Select USB Audio CODEC
as the default device for sound playback and recording.
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Getting Started