User's Manual

ManualsBrandsSenal ManualsAudio for VideoCommunication Headset Kit with Connection Cable & USB-Audio Interface

USER’S GUIDE

Table of Contents:

Introduction ...................................2

Precautions ....................................2

Overview ........................................3

Getting Started ............................4

Setting the XU-1648 as

Your Computer’s Default

Sound Device ........................... 4-5

Monitoring with

Your Headphones........................5

Microphone Level

Adjustment ................................... 5

Troubleshooting .......................6-7

Speciﬁcations ...............................7

Warranty .........................................8

Summary of content (8 pages)

PAGE 1
USER’S GUIDE Table of Contents: Introduction....................................2 Precautions.....................................2 Overview.........................................3 Getting Started.............................4 Setting the XU-1648 as. Your Computer’s Default Sound Device............................4-5. Monitoring with. Your Headphones........................5 Microphone Level. Adjustment.................................... 5 Troubleshooting........................6-7 Specifications.......
PAGE 2
Thank you for choosing Senal. The Senal XU-1648 XLR-to-USB Interface enables you to plug your dynamic or condenser XLR microphone into your computer’s USB port. The 16-bit/48-kHz sampling rate delivers studio-quality sound, and the interface provides switchable phantom power for condenser microphones. The headphone output allows latencyfree monitoring, with a headphone level for volume control and a monitor level to adjust the balance between playback audio and the microphone.
PAGE 3
Overview XLR connector XU-1648 Microphone level Mic Level Phantom power button Peak level indicator Signal: green Peak: red +48V Phantom Phantom power indicator Monitor Monitor level Headphone level Headphone USB power indicator USB Headphone output USB connector Also Included: USB cable User’s Guide Overview ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ 3
PAGE 4
Getting Started 1. Plug the XU-1648 into your computer via the included USB cable. The USB power indicator will glow blue. 2. Plug your microphone into the XU-1648’s XLR. connector. If you are using a condenser microphone, press the phantom power button to power your microphone. The phantom power indicator will glow red. Setting the XU-1648 as Your Computer’s Default Sound Device Your computer will automatically detect the XU-1648, but it may not set it as the default sound device.
PAGE 5
If you are using Macintosh OS X, open up System Preferences and select Sound. Select USB Audio CODEC as the default device on the Input and Output tabs. Monitoring with Your Headphones You can plug your headphones directly into the. XU-1648 to monitor your recording without the latency that often occurs when monitoring through a computer’s headphone jack. To monitor through your XU-1648, plug your headphones into the headphone output. Use the headphone level to adjust the headphone volume.
PAGE 6
Troubleshooting Problem Solution The XU-1648 will not turn on. Make sure the USB cable is plugged into the XU-1648 and the computer’s USB port. Make sure the USB port is powered. The microphone will not record. Make sure the microphone is plugged into the XU-1648. If you are using a condenser. microphone, press the phantom power button. Make sure you have selected the XU-1648 as the default sound. recording/audio input device.
PAGE 7
Problem Solution The playback. audio is not. audible. Turn up the monitor level. The playback. audio is delayed. Turn off monitoring in the recording channel of your audio software. Specifications Input: XLR Input impedance: 1,200 Ω Input gain range: 35 dB Headphone output: 3.5 mm stereo Headphone output: 50 mW (16 Ω) USB connector: Standard-B, digital audio interface Sampling rate - DAC: 32, 44.1, 48 kHz Sampling rate - ADC: 8, 11.025, 16, 22.05, 32, 44.
PAGE 8
One-Year Limited Warranty This Senal product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.