Manualshelf

User's Manual

ManualsBrandsSenao International ManualsElectronicsPoint-to-Point Wireless Outdoor Bridge
11121314151617181920
11
Figure 2-7 Lightning Protector
6. Connect the Ethernet and Power Cable
Ÿ Connect the power code to the DC-IN port on the rear panel of the
DC-Injector.
Ÿ Connect an Ethernet cable to the RJ-45 port (To LAN) on the rear
panel of the DC-Injector. Use the straight cable to connect to the
HUB/SWITCHA or use the crossed cable to connect to the PC’s
Network Interface Card (NIC).
Ÿ Connect an Ethernet cable to the other RJ-45 port (To Bridge) on the
rear panel of the DC-Injector and connect the other end to the LAN1
(PoE) port on the side of DC-Converter.