User's Manual

2
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against radio interference in a commercial environment.
This equipment can generate, use and radiate radio frequency energy and, if not
installed and used in accordance with the instructions in this manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause interference, in which case the user, at his own
expense, will be required to take whatever measures are necessary to correct the
interference.
Notice : The changes or modifications not expressly approved by the party
responsible for compliance could void the user’ s authority to operate the equipment.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance
requirements, no change to the antenna or the device is permitted. Any change to the
antenna or the device could result in the device exceeding the RF exposure
requirements and void user’ s authority to operate the device.
CE Declaration of Conformity
This equipment complies with the requirements relating to electromagnetic compatibility, ETS300/328,
ETS 301/489-17 and EN 60950. This meets the essential protection requirements of R&TTE Directive
99/5/EEC on the approximation of the laws of the member states relation to electromagnetic
compatibility.
IMPORTANCE NOTICE: To comply with FCC RF exposure compliance requirements, the
antenna used for this transmitter must be fixed-mounted on outdoor permanent structures
with a separation distance of at least 1.5 meter from all persons and must not be co-located
or operating conjunction with any other antenna or transmitter. No change to the antenna or
the device is permitted. Any change to the antenna or the device could result in the device
exceeding the RF exposure requirements and void user’s authority to operate the device.