User's Manual

28
Figure 4.5
MAC Address Control allows only client devices with specified MAC
addresses to associate and pass data through this device.
Item Function
MAC Address
Control
Check “Enable ” to enable the “MAC Address
Control”. All of the settings in this page will take
effect only when “Enable ” is checked.
Connection control Check "Connection control" to enable the controlling
of which wired and wireless clients can connect to
this device. If a client is denied to connect to this
device, it means the client can't access to the Internet
either. Choose "allow" or "deny" to allow or deny the
clients, whose MAC addresses are not in the "Control
table" (please see below), to connect to this device.