User's Manual

Association control Check "Association control" to enable the controlling

of which wireless client can associate to the wireless

LAN. If a client is denied to associate to the wireless

LAN, it means the client can't send or receive any data

via this device. Choose "allow" or "deny" to allow or

deny the clients, whose MAC addresses are not in the

"Control table", to associate to the wireless LAN.

Control table "Control table" is the table at the bottom of the "MAC

Address Control" page. Each row of this table

indicates the MAC address and the expected IP

address mapping of a client. There are four columns in

this table as shown in the below Table.

Item Function

MAC Address MAC address indicates a specific client.

IP Address Expected IP address of the corresponding

client. Keep it empty if you don't care its IP

address.

C When "Connection control" is checked,

check "C" will allow/deny the

corresponding client to connect to this

device.

A When "Association control" is checked,

check "A" will allow/deny the

corresponding client to associate to the

wireless LAN.

In this page, we provide the following Combobox and button to help users to

input the MAC address.

Figure 4.6