User's Manual

6
Chapter 2 Hardware Installation
2.1 Panel Layout
2.1.1 Panel of DC-Converter
Figure 2-1 DC-Converter
DC-Converter Indicator:
Function LED Color Status Description
DC-Converter Green On
Power has being applied to
DC-Converter.
Bridge Green On Power has being sent from DC OUT.
POWER
Power
Amplifier
Green On
Power has being applied to Power
Amplifier. Only functionally when the
Power Amplifier has been set into this
device.
Tx
Power
Amplifier Tx
Red Blinking
Data has been sent via Power
Amplifier. Only functionally when the
Power Amplifier has been set into this
device.
Table 2-1
Bridge Indicator:
LED Function Color Status Description
POWER
Power
indication
Green On
Power has being applied to this
product.
M1 System status Red Blinking
This product is functioning
properly.
WLAN
Wireless
activity
Green Blinking
Sending or receiving data via
wireless.
On
An active station is connected to
the corresponding LAN port.
LAN1
LAN2
Link/Act.
Link status Green
Blinking
The corresponding LAN port is
sending or receiving data.
10/100 Data Rate Green On Data is transmitting in 100Mbps