User's Manual

8
2.1.3 Side Panel of Bridge
Figure 2-3 Side Panel of Bridge
Port Description
DC IN
DC connector comes with 12 voltage power which connects with DC-
out
in the DC-Converter.
LAN1
Connects to the LAN1 port which locates in the side panel of
DC-converter.
LAN2
Connects to the LAN2 port which locates in the side panel of side panel
of DC-converter.
Table 2-5
2.1.4 Front Panel of DC-Injector
Figure 2-4 Front Panel of DC-Injector
LED Function Color Status Description
POWER Power indication Green On
Power has being applied to this
product.
Table 2-6
2.1.5 Rear Panel of DC-Injector
Figure 2-5 Rear Panel of DC-Injector
Port Description
DC IN 48V
Connects with a power code which attached by the package.
To LAN
Connects to the existed network. The cable connection should be
straight Ethernet when connect this unit to the HUB/SWITCH and the
crossed cable when connect it directly to a PC Network Interface Card
(NIC).
To Bridge
Connects to the DC-Converter’s LAN1 (PoE) port.
Table 2-7