User's Manual

9
2.2 Procedure of Hardware Installation
Figure 2-6
1. Decide how to place Bridge
Because this product is a radio device works in the 2.4 GHz frequency
range. For optimum utilization, installing this product away from microwave
ovens or other devices, operating in the 2.4 GHz frequency range, which can
cause signal interference. Otherwise, install this product’s antenna in an area
where the trees, buildings and large steel structures such as file cabinet and
bookshelves do not obstruct the signal to and from the antenna. In conclusion,
the antenna should be located in the higher direct line-of-sight space.
2. Lightning Protection
Radio transmitters, receivers and RF cables require protection when
attacked by lightning strikes.
The surge protectors contain fast response gas filled arrestors to provide
low let through voltage for fast rise time transients. The device is configured
to minimize circuit capacitance and the performance can be assured up to
2GHz. Standard models provide protection for receivers and transmitters up to
a 1KW power leve l.
Installing this device in outdoor may be subject to lightning strikes. To
properly protect your equipment, you should install the lightning arrestor to