User Manual
Table Of Contents
- Contents
- Chapter 1 Introduction
- 1- 3 System Requirements
- 1- 4 Features and Benefits
- 1- 5 Applications
- 1- 6 Network Configurations
- Chapter 2 Installing Drivers & Client Utility
- Chapter 3 Connecting to a Network
- Chapter 4 Troubleshooting
- Appendix AProduct Specifications
- Appendix B
- Regulatory Compliance Information
Nonfunctioning card LED
The PC Card is not powered on. The
cause may be:
No Driver loaded or installed.
Card – Driver mismatch which
prevented the driver from loading.
Device conflict which prevented the
driver from loading.
Actions:
Verify that a driver has been installed.
Determine if there is a conflict with
another device.
Weak signal or
intermittent connection.
Try reorienting the antenna. The PC
Card antenna is attached to the end
of the PC Card. For best use of the
antenna:
Keep the area around the antenna
clear from materials that could block
radio transmission, such as metal
objects, electronic devices, and
cordless telephones.
If your signal is weak, change the
direction of the antenna slightly.
If necessary, move your notebook
computer a few inches to find a better
signal.
Use the Link Quality and Signal Strength
display in the Client Utility to determine
the best location and orientation for a
network connection.
24