User's Manual

High-Speed Wireless Access Point Version 1.0
Page 12 of 20
4.4 LAN
h
Click on the
LAN
link on the navigation bar, and then click on
LAN Settings.
You
will then see the LAN Settings page. On this page you can configure the LAN IP,
subnet mask, and default gateway IP addresses.
h
IP Address:
enter the IP address of the Access Point.
h
Subnet Mask:
enter a subnet mask for the IP address.
h
Default Gateway Address:
enter a gateway IP for the Access Point.
h
Click on the
Apply
button to confirm and save the changes.
4.5 Wireless
h
Click on the
Wireless
link on the navigation bar, you will then see two options:
General and 80211g. Each one is described in detail below.
4.5.1 General
h
Click on the
General
link on the navigation bar. On this page you can select for the
Access Point, and choose to enable or disable the 2.4GHz radio.