User's Manual

High-Speed Wireless Access Point Version 1.0

Page 14 of 20

h SSID:

enter the SSID of the wireless network. The SSID is a unique name shared

among all points in your wireless network. The SSID must be identical for all points

in the network, and is case-sensitive.

h Suppress SSID:

place a check in this box if you would like the SSID to be hidden

from other Access Points or a site survey.

h Wireless Mode:

select a data rate from the drop-down menu. One option is

11Mbps and the other is 54Mbps.

h Security:

place a check is this box if you would like to use

WPA

only. If you would

like to configure a more detailed security, click on the

Edit Security Setting

button.

This option is described in the next section.

h Data Rate:

select a data rate from the drop-down list; by default

Best

is selected.

h Transmit Power:

select a transmit power from the drop-down list; by default

full

selected.

h Antenna Diversity:

select

Best

from the drop-down list.

h Beacon Interval (20-1000):

enter a value between 20 and 1000 for the beacon

interval. Beacons announce the existence for the 802.11 networks at regular

intervals.

h Data Beacon Rate DTIM (1-16384):

enter the data beacon rate; the default rate is

h Fragment Length (256-2346):

enter a value between 256 and 2346 for the