User's Manual

High-Speed Wireless Access Point Version 1.0
Page 8 of 20
4 Web Configuration
4.1 Logging In
h
To configure the Access Point through the web-browser, enter the IP address of the
Access Point (default: 192.168.1.1) into the address bar of the web-browser, and
press
Enter
.
h
You will then see the login window. Enter
admin
as the User name and
iktpw
as
the Password and then click on the
OK
button.
h
You can also change the username and password under the
Administrator
Settings
option. Refer to section
4.3.1 Administrator Settings
to change the
username and password.
h
4.2 Getting Familiar with the GUI
h
After logging in, the first page that is displayed in the
Status
page.
h
The GUI consists of three parts and is displayed in the image below:
A.
Navigation Bar
: used to navigate through the available options.
B.
Main Page
: used to view and configure the AP’s settings.
C.
Top Right-hand Corner
: quick buttons for
Home
,
Exit
, and
Reset
. Click on the
Home
button to return to the status page. Click on the
Exit
button to logout, and
click on the
Reset
button to restart the AP.