User's Manual

High-Speed Wireless Access Point Version 1.0

Page 9 of 20

4.3 System

h

Click on the

System

link on the navigation bar, you will then see five options:

Administrator Settings, Firmware Upgrade, Configuration Tools, Factory Default,

and Rest. Each one is described in detail below.

4.3.1 Administrator Settings

h

Click on the

Administrator Settings

link. On this page you can configure the user

name, password, system name and telnet.

h

Set another username and password to restrict management access to the Access

Point.

h

Username:

enter a new user name.

h

Password:

enter a new password.

h

System Name:

enter a unique name for this device.

h

Enable Telnet:

place a check in this box if you would like to allow telnet access to

this device.