User's Manual

10
2- 2 Checking after Installation
After installing the driver and utility, follow the steps below to check that the PC Card is
operating correctly.
1. Click the Start button, select Settings, and then click Control Panel.
2. In the Control Panel window, double-click the System icon, then select the Device Manager tab.
3. Double-click Network adapters, then select Wireless Network Adapter as shown in Figure 2-7.
Figure 2-7
4. Right mouse and click the Properties button, then check the message. This device is working
properly is displayed for Device status as shown in Figure 2-8.
Figure 2-8
5. If you find the Yellow (?) sign on the adapter or the above message is not displayed, it
shows the installation is not successful or the wireless LAN PC Card is not operating
properly. Uninstall and re-install the driver, referring to Chapter 2-4 Uninstalling Driver and
Utility.