Manualshelf

User's Manual

ManualsBrandsSenao International ManualsComputers & AccessoriesWireless Cardbus Adapter
11121314151617181920
11
2- 3 IEEE 802.11 WLAN NIC Client Utility
Use the WLAN NIC Client Utility to configure the device driver. Access the Utility by clicking
the Start button and choosing Programs > IEEE 802.11 > ACU. The ACU tray icon is displayed
in the right side of the Toolbar. Launch the ACU by double-clicking the tray icon, or by right-
clicking the tray icon and selecting Launch Client Utility …
WLAN Client Utility is used to display or change the PC Card information about Current
Status, Profile Management and Diagnostics. The client utility will be installed automatically
after installing the driver and utility. After finishing installing the driver and utility, the client utility
will automatically be executed and show a small icon at the right corner of Taskbar whenever
the PC Card is inserted into the PC Card slot of your computer. You can click the taps on the
top of the windows to select various screen messages as shown in Figure 2-9.
Figure 2-9
The tool bar provides three functions of Action, Option and Help.
Action : the Disable Radio function is used to break down the wireless connection, the
Country Select… is used to select suitable country code for the utility and if you
don’t want to see icon shown in Taskbar, you can use Disable Tray Icon function to
hide the icon.
Option : you can use Display settings to change Signal Strength Display Units, Refreash
Interval and Data Disply settings.
Help : click About IEEE 802.11 Client Utility… function to get related information of the Client
Utility.
Except for tool bar’s function, the Utility also provides Current Status, Profile Management and
Diagnostics three main function page for configuration.
Below we explain the use and meanings of the various screen messages.
1. Current Stasus
In Current Status, it will provides user information of Profile Name, Network Type, Wireless Mode,
Current Channel, Link Status, Encryption and IP Address. If you click Advanced button, it will pop
advanced status as shown in Figure 2-10, and in Advanced Status, it provide user information of Country,
Transmit Power Level, Network Name (SSID), Power Save Mode, Frequency, Transmit Rate and
Receive Rate.