User's Manual

12
Figure 2-10
2. Profile Management
In Profile Management, it provides function to New, Modify, Remove or Activate an Profile settings as
shown in Figure 2-11. With default status, the profile will be empty and you have to click New button to
add an profile settings and if there exist Profile file, we can use Modify button to change settings or use
Remove button to erase file or Activate button to activate another profile settings.
Figure 2-11
After click New button, it will pop Profile Management window including General, Security and Advanced
three configuration pages.
In General page : type the desirable profile name into the Profile Name field and the known SSID into
the Network field.
In Security page : the default value is Disable and we provide Pre-Shared Keys, LEAP and Externally
Managed 802.1x Keys for selection.
In Advanced page : you can set Power Save Mode, Network Type, 802.11 Preamble, Transmit Power
Level and Wireless Mode in this page.
In Profile Management, it also provides Available Networks…. for the user to get information
of available AP and Ad Hoc Networks as shown in Figure 2-12.