User's Manual

16
Figure 3-1
Select Microsoft for Manufacturer and Client for Microsoft Networks for Network Client, and then click
OK.
3-2 Checking and Adding NetBEUI
NetBEUI is a protocol you can use to connect to Windows NT, Windows for Workgroups, or LAN
Manager servers. If you work on Microsoft network environment, you need to set up NetBEUI protocol.
Repeat the step 2 and 3 of Chapter 3-1 Checking and Adding Client for Microsoft Networks. Select
Configuration tab to check NetBEUI -> Wireless LAN PC Card is installed. If no, click the Add or Install
button. Select Protocol and click the Add button. Select Microsoft for Manufacturer and NetBEUI for
Network Protocol, and then click OK.
3-3 Checking and Adding TCP/IP
TCP/IP is the protocol you use to connect to the Internet and wide-area networks. If you want to connect
to Internet, you need to set up TCP/IP protocol.
Repeat the step 2 and 3 of Chapter 3-1 Checking and Adding Client for Microsoft Networks. Select
Configuration tab to check TCP/IP -> Wireless LAN PC Card is installed. If no, click the Add or Install
button. Select Protocol and click the Add button. Select Microsoft for Manufacturer and TCP/IP for
Network Protocol, and then click OK.
If yes, double-click TCP/IP -> Wireless LAN PC Card to open TCP/IP properties as shown in Figure 3-2.
Due to different network applications there are many different settings here. You can select either Obtain
an IP address automatically or Specify an IP address. If you use the Specify and IP address, then you
need to enter an IP address, Subnet Mask, Gateway IP address, and DNS Server IP address for