User's Manual

Figure 2-7

4. Right mouse and click the Properties button, then check the message. This device is working

properly is displayed for Device status as shown in Figure 2-8.

Figure 2-8

5. If you find the Yellow (?) sign on the adapter or the above message is not displayed, it

shows the installation is not successful or the wireless LAN PC Card is not operating

properly. Uninstall and re-install the driver, referring to Chapter 2-4 Uninstalling Driver and

Utility.

2- 3 IEEE 802.11 WLAN NIC Client Utility

Use the WLAN NIC Client Utility to configure the device driver. Access the Utility by clicking the

Start button and choosing Programs > IEEE 802.11 > ACU. The ACU tray icon is displayed in the

right side of the Toolbar. Launch the ACU by double-clicking the tray icon, or by right-clicking the

tray icon and selecting Launch Client Utility …