User's Manual

Figure 2-15

2- 4 Uninstalling Driver and Utility

If the PC Card installation is unsuccessful for any reason, the best way to solve the

problem may be to completely uninstall the PC Card and its software and repeat the

installation procedure again.

1.Click the Start button, select Settings, and then click Control Panel.

2.In the Control Panel window, double-click the Add or Remove Programs icon, then select the

802.11 Wireless LAN item and remove the driver and utility as shown in Figure 2-16.

Figure 2-16

Select Remove in InstallShield Wizard and click Next to start to remove driver then click Finish to

complete driver and utility uninstallation as shown in Figure 2-17.

Figure 2-17

Chapter 3 Connecting to a Network

This chapter describes how to prepare for connection to network after install the PC Card drivers

and utility. The following is required for all computers if you want to connect to a network.

1. Check Client for Microsoft Networks is installed.

2. Check NetBEUI -> Wireless LAN PC Card installed.

3. Check TCP/IP -> Wireless LAN PC Card is installed.

4. Check file and printer sharing for Microsoft Networks.