User's Manual

Dual Band Wireless Access Point Version 1.0
Page 8 of 24
4 Web Configuration
4.1 Logging In
 To configure the Access Point through the web-browser, enter the IP address of
the Access Point (default: 192.168.1.1) into the address bar of the web-browser,
and press Enter.
 You will then see the login window. Enter admin as the User name and iktpw
as the Password and then click on the OK button.
 You can also change the username and password under the Administrator
Settings option. Refer to section 4.3.1 Administrator Settings to change the
username and password.

4.2 Getting Familiar with the GUI
 After logging in, the first page that is displayed in the Status page.
 The GUI consists of three parts and is displayed in the image below:
A. Navigation Bar: used to navigate through the available options.
B. Main Page: used to view and configure the AP’ s settings.
C. Top Right-hand Corner: quick buttons for Home , Exit, and Reset. Click on
the Home button to return to the status page. Click on the Exit button to
logout, and click on the Reset button to restart the AP.