User Manual

8
Figure 2-1-1
1. The setup program should start automatically as shown in Figure
2-1-1. If it does not start, you can run it manually by selecting RUN
from the Start menu and running Setup.htm from CD-ROM drive.
2. From Wireless LAN Installer, select Utility & Driver Install. The
driver and utility of Wireless LAN PC Card will be installed
automatically.
3. Insert the PC Card into the PCMCIA slot of your computer.
4. The Wireless LAN PC Card will be found and installed without
restart the computer.
5. Make sure that the network protocol parameters are set correctly for
your computer. These include the IP address, subnet mask,
gateway and DNS. If you are unfamiliar with how to set network
protocol parameters, refer to Chapter 3 Connection to Network for
details.