User Manual

without an access point, you need to select Peer-to-Peer mode.

Each station in a Peer-to-Peer (Ad-Hoc) network must specify the

same network name (SSID) and peer-to-peer channel.

Access Point: If at least one access point involves in the

communications in a group of stations, you need to select

Infrastructure mode. Each station needs to specify the same

network name (SSID) as the access point. Please refer to the

section 1-6 for more details about peer-to-peer mode and Access

Point (infrastructure) mode.

Peer-to-Peer Channel

This option is just for Peer-to-Peer (Ad-Hoc) mode. You need to

specify a channel on which the communications are established.

Each station in a Peer-to-Peer (Ad-Hoc) network must specify the

same channel and network type (SSID).

Power Save Mode

Power Save function as shown in Figure 2-3-9 .This function can

conserve more battery energy and extend the battery life. This

function has three options for power save mode. Below is detailed

description as shown in Table 2-3-2.

On Enable Power Save function.

Off Disable Power Save function.

Auto

Utility will automatically detect what kind of power

supply a machine uses and then determine to enable

or disable Power Save function.

If device uses battery, Power Save Mode is set to on.

If device uses AC Power, Power Save Mode is set to

off.

Table 2-3-2