User Manual

15
2- 2 Checking after Installation
After installing the driver and utility, follow the steps below to check that
the PC Card is operating correctly.
1. Click the Start button, select Settings, and then click Control
Panel.
2. In the Control Panel window, double-click the System icon, and
then select the Device Manager tab.
3. Double-click Network adapters, then select Wireless LAN PC
CARD as shown in Figure 2-2-1.
Figure 2-2-1
4. Click the Properties button, and then check the message. This
device is working properly is displayed for Device status as shown
in Figure 2-2-2.